saw bandpass filter F1G72 part no. F1G72 rev. date 20080923 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. nc8009as01 1/7 4 5 6 1 23 1 23 65 4 features dcs1800 applications usable bandwidth of 75 mhz no impedance matching require for operation at 50 ceramic surface mounted device package ( 3.0 mm * 3 .0 mm ) singleended operation rohs compliant package dimensions dimensions shown are nominal in millimeters body : al 2 o 3 ceramic lid : kovar, ni plated terminations : au plating 0.3 ~ 1.0 um, over a 1.27 ~ 8.89 um ni plating maximum ratings parameters unit minimum typical maximum operating temperature range 20 25 70 storage temperature range 40 85 power handling capability dbm 20 electrostatics sensitive device ( esd ) pin configurations 2 input 5 output 1, 3, 4, 6 case ground i 1g72
saw bandpass filter F1G72 part no. F1G72 rev. date 20080923 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. nc8009as01 2/7 specifications notes : 1) all specifications are based on the matching s chematic shown below, measured by agilent network a nalyzer and full 2 port calibration. 2) electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 3) all attenuation measurements are measured relati ve to insertion loss minimum typical maximum unit center frequency ( fc ) 1747.5 mhz insertion loss (in fc +/ 37.5 mhz) 2.6 4.0 db amplitude ripple (in fc +/ 37.5 mhz) 1.6 2.5 dbp p vswr (in fc +/ 37.5 mhz) 1.8 2.5 relative attenuation dc ~ 1670.0 mhz 1670.0 mhz ~ 1690.0 mhz 1805.0 mhz ~ 1880.0 mhz 1880.0 mhz ~ 4500.0 mhz 4500.0 mhz ~ 5000.0 mhz 15.0 6.0 6.0 15.0 10.0 23.0 24.0 24.0 25.0 14.0 db temperature range (operational) 20 25 70 input rf power (in fc +/ 37.5 mhz) 20 dbm input/output impedance 50 ohms
saw bandpass filter F1G72 part no. F1G72 rev. date 20080923 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. nc8009as01 3/7 input 50 output 50 matching schematic ( actual matching values may vary due to pcb layout and parasitics ) marking configuration 1) i 2) 1g72 3) 1) pad number 1 index 2) manufacturer name 3) marking number * ink or laser marking available
saw bandpass filter F1G72 part no. F1G72 rev. date 20080923 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. nc8009as01 4/7 typical performance ( at 25 )
saw bandpass filter F1G72 part no. F1G72 rev. date 20080923 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. nc8009as01 5/7 input / output vswr charts input / output smith charts
saw bandpass filter F1G72 part no. F1G72 rev. date 20080923 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. nc8009as01 6/7 packing specification 1. reeling quantity : 3000 pcs / 13 reel ( or 1000 pc s / 7 reel ) 2. taping structure : the tape shall be wound around t he reel in the direction shown below. tape specification 1. leader part and vacant position specification 2. tensile strength of carrier tape 4.4n/mm width 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g reel reel reel reel top cover tape top cover tape top cover tape top cover tape carrier tape carrier tape carrier tape carrier tape end end end end start start start start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 0~15 degree top cover tape direction of pull carrier tape
saw bandpass filter F1G72 part no. F1G72 rev. date 20080923 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. nc8009as01 7/7 carrier tape dimensions [unit : mm] part direction reel dimensions [unit : mm] a 3.40 0.1 b 3.40 0.1 c 7.25 0.1 d 1.70 0.1 e 12.00 0.1 f 8.00 0.1 tape running direction
|
